CFF 16i RAID/HBA adapter + CFF expander
• “Front backplanes: 24 x 2.5-inch SAS/SATA” on page 105
• “Rear backplane: 4 x 2.5-inch SAS/SATA” on page 106
• “Middle and rear backplanes: 8 x 2.5-inch SAS/SATA + 4 x 2.5-inch SAS/SATA” on page 107
• “Middle and rear backplanes: 8 x 2.5-inch SAS/SATA + 8 x 2.5-inch SAS/SATA” on page 108
Front backplanes: 24 x 2.5-inch SAS/SATA
The following shows the cable connections for the 24 x 2.5-inch SAS/SATA configuration with one CFF 16i
RAID/HBA adapter and one CFF expander.
From To
Backplane 1: SAS CFF expander: C0
Backplane 2: SAS CFF expander: C1
Backplane 3: SAS CFF expander: C2
CFF expander: RAID/HBA CFF 16i RAID/HBA adapter: C0, C1
CFF 16i RAID/HBA adapter: MB Onboard: PCIe 3
CFF 16i RAID/HBA adapter: PWR Onboard: RAID PWR
CFF expander: PWR Onboard: EXP PWR
Connections between connectors:
1 ↔ 1 , 2 ↔ 2 , 3 ↔ 3 , ... n ↔ n
Figure 49. Cable routing for the 24 x 2.5-inch SAS/SATA configuration with one CFF 16i RAID/HBA adapter and one CFF
expander
Chapter 3. Internal cable routing 105
To Next Page
Loading...
