Lenze i55AE155F

Parameter Name / value range / [default seng] Info
0x1A05:001 TPDO6 mapping parameter: Applicaon object 1
•
Read only
•
From version 02.00
Mapping entry for the selecon of an object to be sent.
0x1A05:002 TPDO6 mapping parameter: Applicaon object 2
•
Read only
•
From version 02.00
0x1A05:003 TPDO6 mapping parameter: Applicaon object 3
•
Read only
•
From version 02.00
0x1A05:004 TPDO6 mapping parameter: Applicaon object 4
•
Read only
•
From version 02.00
0x1A05:005 TPDO6 mapping parameter: Applicaon object 5
•
Read only
•
From version 02.00
0x1A05:006 TPDO6 mapping parameter: Applicaon object 6
•
Read only
•
From version 02.00
0x1A05:007 TPDO6 mapping parameter: Applicaon object 7
•
Read only
•
From version 02.00
0x1A05:008 TPDO6 mapping parameter: Applicaon object 8
•
Read only
•
From version 02.00
0x1A05:009 TPDO6 mapping parameter: Applicaon object 9
•
Read only
•
From version 02.00
0x1A05:010 TPDO6 mapping parameter: Applicaon object 10
•
Read only
•
From version 02.00
0x1A05:011 TPDO6 mapping parameter: Applicaon object 11
•
Read only
•
From version 02.00
0x1A05:012 TPDO6 mapping parameter: Applicaon object 12
•
Read only
•
From version 02.00
0x1A05:013 TPDO6 mapping parameter: Applicaon object 13
•
Read only
•
From version 02.00
0x1A05:014 TPDO6 mapping parameter: Applicaon object 14
•
Read only
•
From version 02.00
0x1A05:015 TPDO6 mapping parameter: Applicaon object 15
•
Read only
•
From version 02.00
0x1A05:016 TPDO6 mapping parameter: Applicaon object 16
•
Read only
•
From version 02.00
0x1C00:001 Sync Manager communicaon type: SM1 communica-
on type
•
Read only
•
From version 02.00
The communicaon type SM1 is used for the mailbox input (MbxIn).
0 Reserved
1 Receive mailbox
2 Transmit mailbox
3 Transmit process data
4 Receive process data
0x1C00:002 Sync Manager communicaon type: SM2 communica-
on type
•
Read only
•
From version 02.00
The communicaon type SM2 is used for the mailbox output (MbxOut).
Conguring the network
EtherCAT
Process data transfer
391