Lenze i950 - Page 97

Addional
opmisaon steps
How to opmise the commissioning
Precondions
•
The c
ommissioning is complete.
1.Opmise the
adaptaon of the speed controller gain, e.g. by selecng a dierent mode or a
mulplicave adaptaon. 4Adapng the speed controller gain^ 139
2.Opmise acceleraon compensaon, e.g. adapt it to the current material density or mate-
rial width. 4Acceleraon compensaon^ 133
3.Opmise fricon compensaon, e.g. when the gearbox oil temperature varies. 0x5052:120
4.Opmise the tensile force seng, e.g. when the tensile force starts up too jerkily.
0x5052:002
The opmisaon process is now complete.
Conguring the "Winder Dancer" TA
Commissioning
97