Lenze L-force 9400 Series - Page 212

9400 regenerative power supply module | Parameter setting
Diagnostics & fault analysis
Error messages
212 L EDS94ARNExxxx EN 2.3 - 06/2014
Memory module is defect or missing [0x0068000c]
Safety module is defect or missing [0x0068000d]
Control card incompatible [0x0068000e]
Power section incompatible [0x0068000f]
MXI1: Wrong module [0x00680010]
MXI2: Wrong module [0x00680011]
Response (Lenze setting printed in bold)
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
Operating system could not identify the memory
module.
• Use a different memory module.
• Please contact Lenze.
Response (Lenze setting printed in bold)
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
Operating system could not identify the safety module. • Use a different safety module.
• Please contact Lenze.
Response (Lenze setting printed in bold)
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
The control card is not supported by the operating
system.
Please contact Lenze.
Response (Lenze setting printed in bold)
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
The power section is not supported by the operating
system.
Please contact Lenze.
Response (Lenze setting printed in bold)
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
The extension module in the module slot MXI1 is not
supported by the operating system.
• Use a different module.
• Please contact Lenze.
Response (Lenze setting printed in bold)
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
The extension module in the module slot MXI2 is not
supported by the operating system.
• Use a different module.
• Please contact Lenze.