Lenze L-force 9400 Series - Page 216

9400 regenerative power supply module | Parameter setting
Diagnostics & fault analysis
Error messages
216 L EDS94ARNExxxx EN 2.3 - 06/2014
Internal error (storage blocks) [0x00690004]
Internal error (task queue) [0x00690005]
Internal error (message store) [0x00690006]
Internal error (message queue) [0x00690007]
Internal error (name data base) [0x00690008]
Internal error (event mechanism) [0x00690009]
Response (Lenze setting printed in bold)
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
Serious device error or component failure. Switch off regenerative power supply module, and then
switch it on again.
• Please contact Lenze if the problem occurs again.
Response (Lenze setting printed in bold)
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
Serious device error or component failure. Switch off regenerative power supply module, and then
switch it on again.
• Please contact Lenze if the problem occurs again.
Response (Lenze setting printed in bold)
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
Serious device error or component failure. Switch off regenerative power supply module, and then
switch it on again.
• Please contact Lenze if the problem occurs again.
Response (Lenze setting printed in bold)
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
Serious device error or component failure. Switch off regenerative power supply module, and then
switch it on again.
• Please contact Lenze if the problem occurs again.
Response (Lenze setting printed in bold)
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
Serious device error or component failure. Switch off regenerative power supply module, and then
switch it on again.
• Please contact Lenze if the problem occurs again.
Response (Lenze setting printed in bold)
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
Serious device error or component failure. Switch off regenerative power supply module, and then
switch it on again.
• Please contact Lenze if the problem occurs again.