Lenze L-force 9400 Series - Page 217

EDS94ARNExxxx EN 2.3 - 06/2014 L 217
9400 regenerative power supply module | Parameter setting
Diagnostics & fault analysis
Error messages
Internal error (event mechanism) [0x0069000a]
Internal error (semaphores) [0x0069000b]
Internal error (semaphores) [0x0069000c]
Internal error (file system lifetime) [0x0069000d]
General error in the application [0x006a0000]
Faulty program download [0x006a0001]
Response (Lenze setting printed in bold)
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
Serious device error or component failure. Switch off regenerative power supply module, and then
switch it on again.
• Please contact Lenze if the problem occurs again.
Response (Lenze setting printed in bold)
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
Serious device error or component failure. Switch off regenerative power supply module, and then
switch it on again.
• Please contact Lenze if the problem occurs again.
Response (Lenze setting printed in bold)
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
Serious device error or component failure. Switch off regenerative power supply module, and then
switch it on again.
• Please contact Lenze if the problem occurs again.
Response (Lenze setting printed in bold)
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
For the memory module the maximum number of
permissible writing cycles has been reached.
Exchange memory module, otherwise data may get lost.
Response (Lenze setting printed in bold)
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
General application error. Mains switching. Transfer application to the
regenerative power supply module again.
• Please contact Lenze if the problem occurs again.
Response (Lenze setting printed in bold)
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
Faulty transmission of the application to the
regenerative power supply module (checksum error).
Repeat transmission.