EasyManua.ls Logo

Lenze L-force 9400 Series - Page 224

Lenze L-force 9400 Series
360 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9400 regenerative power supply module | Parameter setting
Diagnostics & fault analysis
Error messages
224 L EDS94ARNExxxx EN 2.3 - 06/2014
Inside the device: Fan is defect [0x00770011]
Device utilisation Ixt > C00123 [0x00780000]
Device utilisation Ixt > 100 % [0x00780001]
Control card is defect (UB24) [0x00780004]
Control card is defect (VCC15) [0x00780005]
Control card is defect (UB8) [0x00780006]
Control card is defect (VCC15 neg.) [0x00780007]
Response (Lenze setting printed in bold) Setting: C00611 ( Adjustable response)
None System fault Fault Trouble Quick stop by trouble Warning locked Warning Information
Cause Remedy
Speed of internal fan is too low, e.g. due to dirt. Check/clean fan.
Response (Lenze setting printed in bold) Setting: C00604 ( Adjustable response)
None System fault Fault Trouble Quick stop by trouble Warning locked Warning Information
Cause Remedy
Frequent and too long acceleration with overcurrent >
C00123
.
Check drive dimensioning.
Response (Lenze setting printed in bold)
None System fault Fault Trouble Quick stop by trouble Warning locked Warning Information
Cause Remedy
Frequent and too long acceleration with overcurrent. Check drive dimensioning.
Response (Lenze setting printed in bold)
None System fault Fault Trouble Quick stop by trouble Warning locked Warning Information
Cause Remedy
Device error Please contact Lenze.
Response (Lenze setting printed in bold)
None System fault Fault Trouble Quick stop by trouble Warning locked Warning Information
Cause Remedy
Device error Please contact Lenze.
Response (Lenze setting printed in bold)
None System fault Fault Trouble Quick stop by trouble Warning locked Warning Information
Cause Remedy
Device error Please contact Lenze.
Response (Lenze setting printed in bold)
None System fault Fault Trouble Quick stop by trouble Warning locked Warning Information
Cause Remedy
Device error Please contact Lenze.

Table of Contents

Other manuals for Lenze L-force 9400 Series

Related product manuals