Lenze L-force 9400 Series - Page 242

9400 regenerative power supply module | Parameter setting
Diagnostics & fault analysis
Error messages
242 L EDS94ARNExxxx EN 2.3 - 06/2014
No heartbeat signal detected [0x00910002]
Heartbeat not periodic [0x00910003]
Internal error: See C00180 [0x00910004]
Internal error: See C00180 [0x00910005]
Internal error: See C00180 [0x00910006]
Internal error: See C00180 [0x00910008]
Internal error: See C00180 [0x00910009]
Response (Lenze setting printed in bold)
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
Internal error If the error occurs frequently, please contact Lenze.
Response (Lenze setting printed in bold)
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
Internal error If the error occurs frequently, please contact Lenze.
Response (Lenze setting printed in bold)
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
Internal error If the error occurs frequently, please contact Lenze.
Response (Lenze setting printed in bold)
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
Internal error Please contact Lenze.
Response (Lenze setting printed in bold)
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
Divisor of division was "0". Exchange application.
Response (Lenze setting printed in bold)
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
Internal error If the error occurs frequently, please contact Lenze.
Response (Lenze setting printed in bold)
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
Internal error If the error occurs frequently, please contact Lenze.