Lenze L-force 9400 Series - Page 243

EDS94ARNExxxx EN 2.3 - 06/2014 L 243
9400 regenerative power supply module | Parameter setting
Diagnostics & fault analysis
Error messages
System task 1: Task overflow [0x0091000a]
System task 2: Task overflow [0x0091000b]
System task 3: Task overflow [0x0091000c]
System task: Task overflow [0x0091000d]
Communication task: Standstill > 3 s [0x0091000e]
Cyclic task: Standstill > 60 s [0x0091000f]
Response (Lenze setting printed in bold)
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
System overload. Please contact Lenze.
Response (Lenze setting printed in bold)
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
System overload. Please contact Lenze.
Response (Lenze setting printed in bold)
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
System overload. Please contact Lenze.
Response (Lenze setting printed in bold)
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
System overload. Please contact Lenze.
Response (Lenze setting printed in bold)
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
System overload or communication task crash. Reduce system load.
• This is possible in the application or in the data
transfer of the communication interfaces.
Response (Lenze setting printed in bold)
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
System overload or CRC check task crash. Reduce system load.
• This is possible in the application or in the data
transfer of the communication interfaces.