Lenze L-force 9400 Series

9400 regenerative power supply module | Parameter setting
Parameter reference
Structure of the parameter descriptions
270 L EDS94ARNExxxx EN 2.3 - 06/2014
10.1.3.4 Parameters with subcodes
Description structure
Parameter setting in the »Engineer«
The »Engineer« parameter list lists all subcodes separately. The parameters are set as
described in the previous chapters.
Parameter | Name:
Cxxxxx | _____________
Data type: _______
Index: _______
Description
Setting range
(min. value | unit | max. value)
Subcodes Lenze setting
Cxxxxx/1
Cxxxxx/2
Cxxxxx/3
Cxxxxx/4
 Read access  Write access  CINH  PLC STOP  No transfer