Lenze L-force 9400 Series

EDS94ARNExxxx EN 2.3 - 06/2014 L 269
9400 regenerative power supply module | Parameter setting
Parameter reference
Structure of the parameter descriptions
10.1.3.3 Parameters with bit-coded setting
Description structure
Parameter setting in the »Engineer«
The »Engineer« uses a dialog box for parameter setting in which the individual bits can be
set or reset. Alternatively, the value can be entered as a decimal or hexadecimal value:
Parameter | Name:
Cxxxxx | _____________
Data type: _______
Index: _______
Description
Value is bit-coded:
Bit 0
...
Bit 31
 Read access  Write access  CINH  PLC STOP  No transfer