Lenze L-force 9400 Series - Page 297

EDS94ARNExxxx EN 2.3 - 06/2014 L 297
9400 regenerative power supply module | Parameter setting
Parameter reference
Parameter list | C00326
C00326
C00327
C00328
C00329
C00330
C00335
C00336
C00337
C00338
C00343
Parameter | Name:
C00326 | Service code
Data type: UNSIGNED_8
Index: 24249
d
= 5EB9
h
This code is used internally by the device and must not be overwritten by the user!
Parameter | Name:
C00327 | Service code
Data type: BITFIELD_32
Index: 24248
d
= 5EB8
h
This code is used internally by the device and must not be overwritten by the user!
Parameter | Name:
C00328 | Service code
Data type: BITFIELD_32
Index: 24247
d
= 5EB7
h
This code is used internally by the device and must not be overwritten by the user!
Parameter | Name:
C00329 | Service code
Data type: BITFIELD_32
Index: 24246
d
= 5EB6
h
This code is used internally by the device and must not be overwritten by the user!
Parameter | Name:
C00330 | Service code
Data type: BITFIELD_32
Index: 24245
d
= 5EB5
h
This code is used internally by the device and must not be overwritten by the user!
Parameter | Name:
C00335 | Service code
Data type: BITFIELD_32
Index: 24240
d
= 5EB0
h
This code is used internally by the device and must not be overwritten by the user!
Parameter | Name:
C00336 | Service code
Data type: BITFIELD_32
Index: 24239
d
= 5EAF
h
This code is used internally by the device and must not be overwritten by the user!
Parameter | Name:
C00337 | Service code
Data type: BITFIELD_32
Index: 24238
d
= 5EAE
h
This code is used internally by the device and must not be overwritten by the user!
Parameter | Name:
C00338 | Service code
Data type: BITFIELD_32
Index: 24237
d
= 5EAD
h
This code is used internally by the device and must not be overwritten by the user!
Parameter | Name:
C00343 | CAN TPDO counter
Data type: UNSIGNED_32
Index: 24232
d
= 5EA8
h
Display range (min. value | unit | max. value)
0 4294967295
Subcodes Information
C00343/1 Counter for TPDO1 ... TPDO4
"CAN on board" system bus
C00343/...
C00343/4
 Read access  Write access  CINH  PLC STOP  No transfer