Lenze L-force 9400 Series

EDS94ARNExxxx EN 2.3 - 06/2014 L 333
9400 regenerative power supply module | Parameter setting
Parameter reference
Parameter list | C02123
C02123
C02547
C02548
Parameter | Name:
C02123 | Runtime IdleTask
Data type: UNSIGNED_32
Index: 22452
d
= 57B4
h
Runtime measurement
Display range (min. value | unit | max. value)
0 μs 3600000000
Subcodes Information
C02123/1 Curr. runtime IdleTask
C02123/2 Max. runtime IdleTask
 Read access  Write access  CINH  PLC STOP  No transfer
Parameter | Name:
C02547 | DI_dnState
Data type: INTEGER_32
Index: 22028
d
= 560C
h
Bit-coded state of device interface.
Display range (min. value | unit | max. value)
-2147483648 2147483647
 Read access  Write access  CINH  PLC STOP  No transfer
Parameter | Name:
C02548 | DI_bErrors
Data type: UNSIGNED_32
Index: 22027
d
= 560B
h
Display of digital error signals of device interface.
Selection list (display only)
0 FALSE
1 TRUE
Subcodes Information
C02548/1 DI_bResetError1
C02548/2 DI_bResetError2
C02548/3 DI_bResetError3
C02548/4 DI_bSetExternError
 Read access  Write access  CINH  PLC STOP  No transfer