9400 regenerative power supply module | Parameter setting
Device interface
Device commands
74 L EDS94ARNExxxx EN 2.3 - 06/2014
Possible status displays for these device commands
Related device commands
Activate parameter sets 1 ... 4
( 71)
Status (C00003) Meaning
for command
301
for command
302
for command
303
for command
304
19760386 19825922 19891458 19956994 Device command in process
19726336 19791872 19857408 19922944 Device command executed successfully
19726337 19791873 19857409 19922945 General fault
19760132 19825668 19891204 19956740 File could not be opened.
19760157 19825693 19891229 19956765 Fault while reading out of a file.
19760158 19825694 19891230 19956766 Fault while writing to a file.
19760160 19825696 19891232 19956768 Unexpected file end.
19767297 19832833 19898369 19963905 Access to file has been denied since the file is
already accessed from another position.
19767301 19832837 19898373 19963909 I/O fault during accessing the file system
19767308 19832844 19898380 19963916 RAM memory is full
19767309 19832845 19898381 19963917 Access authorisation denied
19767324 19832860 19898396 19963932 No free memory on the memory module
To Next Page
Loading...
