4-5. Using the driving support systems
• When the camera is covered or there is
an object in the image capture range
• Tires have been replaced
• When the back door is open
• When the steering wheel is operated at
or more than a specified steering angle
• On roads that are not flat, such as slopes
Lines indicating current vehicle and tire position are displayed in a composite view
on an image taken behind the current vehicle position and assists the driver to
check conditions underneath the vehicle or determine the position of the rear tires.
To display the screen, press the VIEW switch when the shift lever is in the P, D or N
position, select the under vehicle terrain view (rear wheel) selection switch.
z It is necessary to drive a certain distance or more for the image to be displayed.
z If the under vehicle terrain view display is selected while the screen is displayed,
the screen switches from normal to magnified display. (Selecting the display
again returns the screen to the normal display)
Q Guide lines
The tire position indicator lines and vehi-
cle position indicator lines may differ
from actual vehicle positions depending
on the number of passengers, cargo
weight, road grade, road surface condi-
tions, brightness of the surrounding envi-
ronment, whether tires or suspension
parts other than those specified are
equipped, etc. Always drive the vehicle
while confirming the safety of your sur-
roundings.
Q Under vehicle terrain view display
The image displayed is one that was pre-
viously taken at a point behind the cur-
rent vehicle position. In cases such as
when objects move after the image is
taken, the image displayed on the screen
may differ from the actual state. In addi-
tion, when driving in the dark such as at
night, there are cases when obstacles
cannot be confirmed from the image.
Under vehicle terrain view (rear wheel) & dual side views
To Next Page
Loading...
