LINET Essenza 300

D9U001EZ3-0101_00 195
18 Cleaning and Disinfection
WARNING!
Risk of injury due to incorrect preparation!
► Ensure pedals will not be pressed accidentally during cleaning.
► Ensure the Essenza 300 is disconnected from the mains before cleaning the Essenza 300.
CAUTION!
Material damage due to incorrect cleaning/disinfection!
► Do not use washing tunnels to clean the bed.
► Do not use pressure or steam cleaners.
► Follow the instructions and observe the dosages recommended by the manufacturer.
► Ensure that disinfectants are selected and applied exclusively by qualied hygiene experts.
► Respect used materials during cleaning and desinfection! For information see the following table.
► Check if used cleaning agents and disinfectants are compatible with materials that the product con-
sists of! For information see the following table.
BED COMPONENTS
THAT ARE INTENDED
TO BE CLEANED
Do not clean what is
not mentioned in this
column!
MATERIALS (SURFACES OF THE MENTIONED BED COMPONENTS)
Competent user is responsible for check if used cleaning agents and disinfectants are com-
patible with mentioned materials!
Head board and Foot
board
plastic version: Polypropy-
lene (PP)
aluminium version with HPL board: Oxidized aluminium alloy +
Lacquered steel + Stainless steel + High Pressure Laminate (HPL) +
Polyamide (PA)
Plastic Head siderails
and Foot siderails /
Telescopic Head side-
rails and Foot siderails
/ Single collapsible
siderails
plastic siderails: Polypro-
pylene (PP) + Polyamide
(PA) + Lacquered steel
+ Acrylonitrile butadiene
styrene (ABS)
telescopic siderails: Oxidized
aluminium alloy + Lacquered alu-
minium (Al) + Acrylonitrile butadiene
styrene (ABS) + Polyamide (PA) +
Polypropylene (PP) + Polyoxymethy-
lene (POM) + Stainless steel
collapsible siderails: Lacque-
red steel + Polyamide (PA) +
Polyoxymethylene (POM) +
Acrylonitrile butadiene styre-
ne (ABS) + Polyvinyl chloride
(PVC)
Mattress support
platform covers on
Backrest, Thighrest and
Calfrest
Polypropylene (PP)
Seat section cover Acrylonitrile butadiene styrene (ABS)
Castors Polyurethane (PUR) + Polyamide (PA) + Polypropylene (PP)
Castor control levers Polyamide (PA6)
Frame of the mattress
support platform
Polyamide (PA) + Lacquered steel
Undercarriage Lacquered steel
Corner bumpers Polypropylene (PP)
Keyboards (Attendant
Control Panel, Handset
Control Panel, control
elements integrated in
the siderails)
Acrylonitrile butadiene styrene (ABS) + Polyoxymethylene (POM) + Polyethylene terephthalate (PET)
CPR levers Polyamide (PA6)
Labels Polyethylene terephthalate (PET)
Accessory rails Polyoxymethylene (POM) + Lacquered steel
Actuator covers Polyamide (PA6) + Aluminium (Al)
Linen Shelf plastic Linen Shelf: Poly-
propylene (PP)
aluminium Linen Shelf: Oxidized aluminium alloy + Zinc-coated steel
+ Stainless steel + Acrylonitrile butadiene styrene (ABS) + Polyamide
(PA) + Polyoxymethylene (POM)