EasyManua.ls Logo

LINET Essenza 300

LINET Essenza 300
200 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
D9U001EZ3-0101_0038
6 Use and Storage Conditions
Respect values of the parameters connected with environment conditions in the chapter Technical Specication during 
use and storage of the product.
Essenza 300 is not suitable for indoor environments containing ammable gases (except oxygen cylinders).
Essenza 300 is not suitable for continuous operation. Duty cycle equals to 2 minutes in operation during 20 minutes.
Essenza 300 is designed for use in rooms for medical purposes. Electrical installations connected to the Essenza 300 must there-
fore meet local norms laying down the necessary conditions for electrical installations.
To increase the safety of electrical equipment:
Disconnect the Essenza 300 from the mains in exceptional cases (i.e. lightnings, earthquake).
DANGER!
Danger to life due to electric shock!
To ensure the bed’s class I protection against electric shocks:
Ground the mains.
Use exclusively Hospital Grade or Hospital Only receptacles for grounding.
Available Connector Intended Use Restrictions
1) Plug&Play for Hand-
set Control Panel (right
bed side)
Special connection for optional wired handset
for bed control (intended for patient).
Connect only the LINET Handset Control Panel!
2) Plug&Play for Atten-
dant Control Panel
(right bed side)
Special connection for optional wired ACP for
bed control (intended for nurse).
Connect only the LINET Attendant Control Panel
compatible with Essenza 300!
3) USB connectors (2
pieces, bed sides
depending on the type
of siderails, see „15.9
USB charger“ on the
page 150)
USB charger for patient‘s personal mobile
devices (i.e. mobile phones, tablets).
Maximum available power output 5 V DC / max. 2
A, use only for charging!
4) Connector for Ea-
syDrive Control Panel
(see „15.11 EasyDrive“
on the page 154)
Special connection for optional wired
EasyDrive Control Panel for use of the Easy-
Drive system (intended for nurse).
Only connect the LINET EasyDrive Control Panel!
7 Scope of Delivery and Product Variants
7.1 Delivery
Upon receipt, check that the shipment is complete as specied on the delivery note.
Notify the carrier and supplier of any deciencies or damages immediately as well as in writing or make a note on the
delivery note.
7.2 Scope of Delivery
Essenza 300 Medical bed
Instructions for Use

Table of Contents

Related product manuals