LINET Essenza 300

D9U001EZ3-0101_0068
Fig. Correct positions of the Attendant Control Panel on the Telescopic Siderails
11.4 Castor Control
CAUTION!
Risk of material damage due to incorrect transport and involuntary movement!
► Prior to transport, ensure that the bed is disconnected from the mains.
► Hang the power supply cord on the transport hook on the Head Board before bed transport.
► Ensure the castors are braked prior to putting into service, removal from service and maintenance.
► Ensure the castors are braked when the bed is occupied.
► Ensure the castors are braked when the bed should not move.
► Ensure the castors are braked before bed positioning.
► Have the bed transported exclusively by nursing personnel.
► Observe the path for any obstacles and avoid collisions and possible damages to any bed parts on the under-
carriage.
The bed is equipped with central castor control and brake system.
A directional castor can be situated at bed head end or bed foot end depending on bed conguration.
The castor control levers are located in the four corners of the undercarriage.
Castor Configurations of the Essenza 300 bed:
□ 125 mm Tente Integral simple castors + Fifth castor
□ 150 mm Tente Integral Soft brake simple castors
□ 150 mm Tente Integral Soft brake simple castors + Fifth castor
□ 150 mm Tente Integral Soft brake simple castors + EasyDrive
□ 150 mm Tente Linea double castors + Fifth castor
□ 150 mm Tente Linea double castors
□ 125 mm Tente Linea double castors + Fifth castor
□ 125 mm Tente Linea double castors