LINET Essenza 300

D9U001EZ3-0101_0076
Fig. Handset Control Panel
7 8
2
1
3
4
5
6
12.5 Handset Control Panel
1. Backrest Adjustment Buttons (up/down)
2. Autocontour Adjustment Buttons (up/down)
3. Flashlight Button
4. Bed Height Adjustment Lock LED Indicator (ON - locked)
5. Bed Height Adjustment Buttons (up/down + Extra Low
Position for Essenza 300 with Lateral Tilt)
6. Thighrest Adjustment Buttons (up/down)
7. Thighrest Adjustment Lock LED Indicator (ON - locked)
8. Backrest Adjustment Lock LED Indicator (ON - locked)
To switch on the ashlight:
► Press and hold Flashlight button.
Flashlight emits light as long as the Flashlight button is pressed.
To disable bed positioning functions for patient, use:
► Attendant Control Panel for Essenza 300 with Lateral Tilt
► Attendant Control Panel for Essenza 300
► Siderail Control Panel for Essenza 300 with Lateral Tilt
► Siderail Control Panel for Essenza 300
Patient is allowed to use the Handset Control Panel only if hospital personnel had assessed that the patient´s physical and psycho-
logical state is in accordance with use of this control element and only if the hospital personnel had trained the patient in accordan-
ce with these instructions for use.
The use of the Handset Control Panel is described in the chapter Bed Positioning (see „13 Bed Positioning“ on the page 79).
Keyboard of the Handset Control Panel can optionally be illuminated.