Chapter 16 VLAN
82
also set virtual channel pvc3 to be a tagged member for VID:7 VLAN3. Key in the command set vlan add
7 tag wan1 pvc3. Press Enter.
3. Ethernet Port Setup
You must setup the Ethernet Port to allow it to process VLAN1 (VID:3), VLAN2 (VID:5) and VLAN3 (VID:7)
To set LAN1 Ethernet to be a tagged member for VID:3 VLAN1, key in the command set vlan add 3 tag
lan1. Press Enter. To set LAN1 Ethernet to be a tagged member for VID:5 VLAN2, key in the command
set vlan add 5 tag lan1. Press Enter. To set LAN1 Ethernet to be an untagged member for VID:7 VLAN3,
key in the command set vlan add 7 untag lan1. Press Enter. Finally, to set LAN1’s PVID to be VID:7, key
I the command set vlan pvid 7 lan1.
The setup of Application #2 (Figure 15-2) is now complete.
To Next Page
Loading...