Loop Telecom IP6610 - Page 126

Chapter 21 Appendix A: Operation Commands
103
Unit Commands
Command
Parameters Description BR
RT
Level
dns_server name Ipaddr1 [ipaddr2]
[ipaddr3] [ipaddr4]
default_router
name Ipaddr1 [ipaddr2]
[ipaddr3] [ipaddr4]
bcast_addr name ipaddr
netbios_serve
r
name Ipaddr1 [ipaddr2]
[ipaddr3] [ipaddr4]
netbios_node
name value
option_code name code value
hardware name ETHERNET/
TO KEN-
RING/FDDI
h/w addr
next_server name ip_addr
bootfile name filename
fixed_address
name ipaddr
client_identifi
er
name string
default_lease
name secs
max_lease name secs
set dhcp
host
option_code name code value
This is used for setting different configuration
options for host created by the “add host”
command.
-- V Admin
set filter
directi
on
inbund
/outbo
und
list_name
list-1/ list-2/ list-3/ list-4
interface
list-1/ list-2/ list-3/ list-4
set inbound/outbound packet filter --
V Admin
ip ip_addr
xxx.xxx.xxx.xxx
net_mask
xxx.xxx.xxx.xxx
set lan1
set lan1 ip 140.132.1.1 255.255.255.0
set LAN1 IP address --
V Admin