Loop Telecom IP6610 User Manual

Chapter 21 Appendix A: Operation Commands
120
Syntax: delete dhcp dns_server all | IP address
Explanation: Delete either all or specified IP addresses from configured DNS IP servers.
Parameters: None
Command: >delete dhcp netmask
Syntax: delete dhcp netmask
Explanation: Delete default netmask
Parameters: None
Command: >delete dhcp default_lease
Syntax: delete dhcp default_lease
Explanation: Delete global default duration of lease.
Parameters: None
Command: >delete dhcp max_lease
Syntax: delete dhcp max_lease
Explanation: Delete global maximum duration of lease.
Parameters: None
Command: >delete dhcp server_name
Syntax: delete dhcp server_name
Explanation: Delete global next server name.
Parameters: None
Command: >delete dhcp bootfile
Syntax: delete dhcp bootfile
Explanation: Delete global boot file name for the client. (Boot file name is the name that the client uses
later to boot up the system).
Parameters: None
Command: >delete dhcp default_router
Syntax: delete dhcp default_router all | IP address
Explanation: Delete either all or specified IP addresses from configured default routers.
Parameters: None
Command: >delete dhcp bcast_address
Syntax: delete dhcp bcast_address
Explanation: Delete default (global) broadcast address for clients.
Parameters: None
Command: >delete dhcp netbios_server
Syntax: delete dhcp netbios_server all | IP address
Explanation: Delete either all or specified IP addresses from configured default netbios servers
Parameters: None
Command: >delete dhcp netbios_node

Loop Telecom IP6610 Specifications

General

Brand	Loop Telecom
Model	IP6610
Category	Network Router
Language	English