Chapter 21 Appendix A: Operation Commands
121
Syntax: delete dhcp netbios_node
Explanation: Delete global netbios node type.
Parameters: None
Command: >delete dhcp option_code
Syntax: delete dhcp option_code code
Explanation: Delete global options identified by the code. If user has set some options using option code
and wants to delete that option, he needs to use this command.
Parameters: code identifies the options that the user wants to delete. The code is compatible
with the RFC value.
Command: >del dhcp subnet all_param
Syntax: del dhcp subnet all_param sub_name
Explanation: Delete all the configuration parameters and the subnet itself for a specific subnet. When the
user is certain that he/she will not use a certain subnet, this command can be used instead
of deleting parameters one by one.
Parameters: sub_name name of the subnet that uniquely identifies it.
Command: >del dhcp subnet network
Syntax: del dhcp subnet network sub_name
Explanation: Delete subnet network number and net mask
Parameters: sub_name name of the subnet.
Command: >del dhcp subnet ip_range
Syntax: del dhcp subnet ip_range sub_name
Explanation: Delete range of IP addresses that are available for the clients.
Parameters: sub_name name of the subnet.
Command: >del dhcp subnet default_lease
Syntax: del dhcp subnet default_lease sub_name
Explanation: Delete (reset to 0) default duration of lease for this subnet.
Parameters: sub_name name of the subnet
Command: >del dhcp subnet max_lease
Syntax: del dhcp subnet max_lease sub_name
Explanation: Delete (reset to 0) maximum duration of lease for this subnet
Parameters: sub_name name of the subnet
Command: >del dhcp subnet next_server
Syntax: del dhcp subnet next_server sub_name
Explanation: Delete next server for this subnet
Parameters: sub_name name of the subnet
To Next Page
Loading...
