Chapter 21 Appendix A: Operation Commands
122
Command: >del dhcp subnet bootfile
Syntax: del dhcp subnet bootfile sub_name
Explanation: Delete boot file name for the subnet. (This name is used by the system to load during the
boot up process)
Parameters: sub_name name of the subnet
Command: >del dhcp subnet domain_name
Syntax: del dhcp subnet domain_name sub_name
Explanation: Delete domain name for this subnet
Parameters: sub_name name of the subnet
Command: >del dhcp subnet dns_server
Syntax: del dhcp subnet dns_server sub_name all | IP address
Explanation: Delete all DNS IP servers that are configured in this subnet. Delete either all or specified IP
addresses from configured DNS IP servers for this subnet
Parameters: sub_name name of the subnet
Command: >del dhcp subnet default_router
Syntax: del dhcp subnet default_router sub_name all | IP address
Explanation: Delete either all or specified IP addresses from configured routers for this subnet
Parameters: sub_name name of the subnet
Command: >del dhcp subnet bcast_addr
Syntax: del dhcp subnet bcast_addr sub_name
Explanation: Delete broadcast address, if any, for this subnet
Parameters: sub_name name of the subnet
Command: >del dhcp subnet netbios_server
Syntax: del dhcp subnet netbios_server sub_name all | IP address
Explanation: Delete either all or specified IP addresses from configured netbios servers for this subnet
Parameters: sub_name name of the subnet
Command: >del dhcp subnet netbios_node
Syntax: del dhcp subnet netbios_node sub_name
Explanation: Delete netbios node type
Parameters: sub_name name of the subnet
Command: >del dhcp subnet option_code
Syntax: del dhcp subnet option_code sub_name code
Explanation: Delete dchp options lidentified by the code. If the user has set an option or options using
the option code and wants to delete that option or options, he/she must use this command.
Parameters: sub_name name of the subnet
code Identifies the options that the user wants to delete. The code is compatible
with the RFC value.
To Next Page
Loading...
