Chapter 6. Panel Editor
6-65
(2) Signed: If selected, the rotation tag will rotate contraries when the value of the device is negative.
2) Graph
(1) Rotation Direction
-. Specifies the Rotation Direction of the tag when the value of the device is positive.
-. If the Rotation Direction is set clockwise and Signed available, it will turn clockwise when the value of the device is
positive and counterclockwise when the value of the device is negative.
(2) Number of Images
-. Specifies the Number of Images which are used to display the rotation tag.
-. Available range of number is 2 ~ 8.
-. Based on the Number of Images specified, each image will be displayed on the Property window. And each image
can be changed as requested by the user. See 6.3 for details on Edit Image.
3) Application Example of Rotation Tag
(1) For an application example, the property of the Rotation Tag is specified as shown below.
(2) Since the Max. RPM is specified 100, the size of each block will be 100/20 = 5.
(3) Time taken for the Rotation Tag to rotate once according to the value of the device D0 of Station No. 1 is as follows.
Data Value Block No. Display Cycle
Time Taken per Round
( (Display Cycle) × (No. of Images) )
5 or less 20
400 ㎳
400ms × 4 = 1600ms
6 ~ 10 19
380 ㎳
380ms × 4 = 1520ms
To Next Page
Loading...