Chapter 7. XGT Panel Function
7-11
7.2.2 Key
1) Function key
Executes a defined function. It does not operate if it is not defined. Refer to the section 6.1.6 for details.
2) ESC key
Shows the list of defined screen. It is possible to move to the screen selected.
For more details about changing screen, refer to the section 7.1.2 Screen Change Mode.
3) ALM key
Changes current mode to the alarm history mode.
For more details about alarm history mode, refer to the section ‘7.1.3 Alarm History Mode’
4) SET key
Changes current mode to the value-changing mode if the tag which is enabled to write exists.
For more details about value-changing mode, refer to the section 6.9.
5) If ENT key (Min. 2 seconds) is pressed or if both ENT key and ESC key are pressed,
8 items on the displayed menu of the XGT Panel are as follows.
1. Cancle Password
2. Lock Password
3. Edit Password
4. Data/Time Set
5. Buzzer Volume Set
6. Backlight Set
7. Download Speed
8. System Information
For more details, refer to ‘7.1.4 XGT Panel System Menu Mode’.
To Next Page
Loading...
Need help?
General
