6-114
(2) For decrement function, data type should be unsigned type.
4) Apply To All Screens
(1) Applies the function of this function key to all screens identically if selected.
(2) Makes the function selection menu inactive of the applicable function key on the other screens if selected, and its setting will
be unavailable if not released from Apply To All Screens.
(Ex) If the user presses F2, setting window is displayed in the Panel Editor. In the XGT Panel, if the user presses F2, data of D0
deceases as many as 10. At this time, data type is unsigned decimal 16 bit data.
6.16.6 Screen
Goes to the specified screen.
1) Screen number
(1) Specifies the number of screen to go.
(2) The function key will not be available if the selected screen does not exist.
To Next Page
Loading...
Need help?
General
