Chapter 6. Panel Editor
6-87
1) Trigger Condition
(1) Specifies an activating condition of the reservation function.
Condition Description
Always Operates always
On Operates during the value of trigger device is On
Off Operates during the value of trigger device is Off
2) Trigger Address
(1) Specifies the address of trigger device (Bit device).
(2) Refer to the section 6.9.3 Button Tag for details about specifying address.
3) Repeat Period
Item Repeat Period
Once Operates once to be reserved.
Every day (D) Operates at the specified time of each day
Every week (W) Operates at the specified time of day of the week.
Every month (M) Operates at the specified time of the day of the month.
To Next Page
Loading...