Lust CDA3000 - Page 352

Application Manual CDA3000
Appendix D Index
A-36
KeyPad menu structure at a glance
............ 3-11
KP/DM
............................................. 5-3
KP200 display
................................... B-20
KP200 user errors
............................... B-21
L
LEDs ............................................. 2-14
LEDs, meanings
................................. 2-14
Limit frequency
.................................. 6-18
Limit switch evaluation
.......................... 5-33
Limit switch evaluation of S4 and S3
........... 4-16
Limitation of output frequency
.................. 5-53
Load surges
...................................... 6-13
Loading device software
........................ 2-20
LustBus interconnection
........................ 5-91
M
Magnetizing current ............................ 5-134
Mass moment of inertia
of motor
....................................... 5-7
of system
...................................... 5-9
Reduction
..................................... 5-9
Setting
......................................... 5-9
Master drive
..................................... 4-53
Master drive with analog guide value input
.... 4-53
Master drive with encoder evaluation
.......... 4-55
Master/-Slave coupling via two control cables
. 4-50
Master/-Slave operation
............... 4-49, 5-114
Parameter comparison
..................... 4-61
Parameters
................................. 5-114
Presets
...................................... 4-52
Maximum speed reduction
...................... 5-70
Measures for your safety
.......................... 1-1
Menu level
....................................... 3-10
Menu structure
.................................. 3-10
Menu structure of KP200, overview
............ 3-10
Modes of action of current-controlled startup/
rundown
.................................... 5-127
Modulation
...................................... 5-129
Module mounting
.................................. 2-6
MOP function
.................................... 5-99
Motor connection of an IEC standard motor
...... 5-6
Motor data
...................................... 5-132
Motor holding brake
............................. 5-96
Motor protection
................................. 5-55
Motor protection characteristic in factory setting
.....
5-56
Motor protection characteristic overload calculation
.
5-59
Motor PTC, specification
........................ 2-10
Motor rated current dependent on inverter module
and IEC standard motor
.................... 5-61
Motor rated power
................................. 5-4
Motor rating plate
................................. 5-7
Motor rating plate data
............................ 5-7
Mounting of the KeyPad on the CDA3000 inverter
module or on the switch cabinet door
....... 3-9
Mounting of user/communication modules
...... 2-6
M-S_1
........................................... 4-53
M-S_2
........................................... 4-55
M-S_3
........................................... 4-57
M-S_4
........................................... 4-59
N
Notes for control engineers .................... 5-127
Notes on optimization
.......................... 5-123
O
Online .............................................. 5-2
Online, definition
.................................. 5-2
Open-loop and closed-loop control
............. 5-96
Open-loop/closed-loop control modes
......... 5-16
Operation with DriveManager
................... 3-13
Optimization aids
................................ 6-46
Optimization of the speed controller
............ 6-61
Option modules
.................................. 5-93
Option slots 1 and 2
............................. 5-51
Output signals
(ASTER = M-S_3 and M-S_4)
.............. 4-58
(ASTER=M-S1 and M-S2)
.................. 4-54
(ASTER=ROT_1, ROT_2 and ROT_3)
...... 4-29
Output, analog
................................... 5-23
Outputs
digital
........................................ 5-34
Specification
................................ 2-10
Overview of option modules
............. 5-52, 5-93
Overview of parameters
........................... A-1