3-101
[5] DON’T ACCESS INTO WORKING RADIUS
Do not let people access into the working radius such as permitting
an operator to go under the hoisted load.
[6] DON’T USE FOR OTHER THAN MAIN APPLICATIONS
Do not move people up/down with the crane.
[7] DON’T PERFORM UNREASONABLE OPERATIONS
Operations requiring more than the machine performance can
cause accidents.
Particularly, the crane operations must be carried out according to
the rated total load chart.
[8] DON’T WIND WIRE BY FORCE
Be careful not to hook the wire rope over a tree or steel beam while
working.
If it gets stuck with something, do not force to wind the wire.
Untangle and then wind the wire.
[9] DON’T OPERATE DURING TRAVELING HOIST
The load may swing or the machine may overturn during the
traveling hoist.
Do not perform slewing operation or crane operations.
To Next Page
