6-47
8.3.6 SET-UP AND CANCEL MICRO SPEED AND ENHANCED SPEED MODE
When it is required to operate the Crane in low speed, use the Micro speed mode, which limits the
maximum speed of the Crane and facilitates the smoother control in the low speed range.
“MICRO SPEED MODE” is available by users’ setting.
Contrary, when it is required to enhance the maximum speed of the Crane operation, the “ENHANCED
SPEED MODE” is also available.
NOTES
“MICRO SPEED MODE” is valid only in the “CRANE MODE”.
[1] SETTING THE MICRO OR ENHANCED SPEED MODE
Push the Speed/Mode button.
Each push will forward the LCD screen indication as shown in the
diagram, below:
When the indicated mode fits your requirement, carry on the
Crane operation in that condition.
[2] CANCEL THE MICRO OR ENHANCED SPEED MODE
Push the Speed/Mode button several times, until LCD
screen indication attains the “Normal”.
To Next Page
Loading...
