Maeda MC-305C-2 - Names and Descriptions of Outrigger Display

3-16
1.5.2 NAMES AND DESCRIPTIONS OF OUTRIGGER DISPLAY
(1) Outrigger setting lamp
(2) Outrigger extension lamp
(3) Boom stowing lamp
• Do not remove, disassemble, or repair detection switches. Do not move the detection switches
from the original location to another.
• If you hit detection switches or found damage on the detection switches, be sure to check the
ON/OFF operation of the lamps on the outrigger display and operation of the crane interlock
function and outrigger interlock function. If you find any error, ask us or our sales service
agency for repair.
[1] OUTRIGGER EXTENSION LAMPS
The lamp turns on to indicate that the outrigger is extended.
Turns on when the position pin (2) is inserted (extension), and
turns off when extracted (stow).
The extraction/insertion of the position pin (2) is detected by the
detection switch (1) of the outrigger rotary.