Maeda MC-305C-2 - Default Chapter; Table of Contents

0-1
CONTENTS
ITEM
Page
INTRODUCTION
1- 1
1. INTRODUCTION 1- 2
2.FOR SAFE USE OF MACHINE 1- 3
3. MACHINE OVERVIEW 1- 4
3.1 SPECIFIED OPERATIONS 1- 4
3.2 MACHINE CONFIGURATION 1- 4
3.3 MACHINE FUNCTIONS 1- 5
4. QUALIFICATION FOR OPERATION 1- 6
4.1 QUALIFICATION FOR CRANE OPERATION 1- 6
5. TERMINOLOGY 1- 7
5.1 DEFINITIONS OF TERMS 1- 7
5.2 DIAGRAM OF WORKING RADIUS AND LIFTING HEIGHT 1- 8
5.3 RATED TOTAL LOAD TABLE 1- 9
5.4 LOAD INDICATOR 1-15
SAFETY
2- 1
1. BASIC PRECAUTIONS 2- 2
2. DRIVING RELATED PRECAUTIONS 2- 7
2.1 BEFORE STARTING ENGINE 2- 7
2.2 AFTER STARTING ENGINE 2- 8
2.3 WORKING WITH CRANE 2-12
3. TRANSPORT PRECAUTIONS 2-21
4. BATTERY HANDLING PRECAUTIONS 2-23
5. MAINTENANCE PRECAUTIONS 2-25
5.1 PRECAUTIONS BEFORE MAINTENANCE 2-25
5.2 PRECAUTIONS DURING MAINTENANCE 2-27
6. SAFETY LABEL LOCATIONS 2-32
7. WEEE DIRECTIVE LABEL LOCATIONS 2-42
OPERATION
3- 1
1. MACHINE EACH SECTION 3- 2
1.1 MACHINE EACH UNIT 3- 2
1.2 TRAVELING AND CRANE OPERATION UNITS 3- 3
1.3 INSTRUMENT PANEL SECTIONS 3- 6
1.3.1 DESCRIPTION OF EACH SWITCHES 3- 7
1.3.2 DESCRIPTION OF EACH MONITORS 3-10
1.3.3 DESCRIPTION OF FUSES 3-12
1.4 OUTRIGGER OPERATION PANEL 3-13
1.5 OUTRIGGER SAFETY DEVICES 3-15
1.5.1 FUNCTIONS OF OUTRIGGER SAFETY DEVICES 3-15
1.5.2 NAMES AND DESCRIPTIONS OF OUTRIGGER DISPLAY 3-16
1.5.3 OUTRIGGER UN-SET WARNING LAMP 3-17
1.6 MOMENT LIMITER (OVERLOAD DETECTOR) 3-18
1.6.1 MOMENT LIMITER CONFIGURATION 3-18
1.6.2 FUNCTION OF MOMENT LIMITER 3-19