6-54
10. SYSTEM SPCIFICATIONS
Items MCT310
Waterproof protection IP65
System configuration Manual and Remote control, both-way
Operation monitor
LCD monitor panel
• Operation status monitor • Battery monitor • Message • Error code
Safety devices
Emergency stop equipment
Abnormal signal detector unit at the engine start
Automatic power cut unit (Automatic Power-OFF)
Voltage drop limiter
Warning switch
Voice messages
(1) Danger, rope over winding
(2) Do not store hook until boom is in travel mode
(3) Remote control is ready
(4) Signal not received
(5) Danger, defective safety device
(6) Danger, defective remote control
(7) Danger, set outriggers
(8) Danger, overload
Control unit voltage Power for the Crane (DC 12V)
Control unit power consumption Approximately 70 watts (maximum, per single function)
Operating ambient temperature -10°C to +55°C
Storage ambient temperature -20°C to +70°C
Transmitter weight 540g
Transmitter functions
Lever switches
Boom raise/lower Raising and lowering
Hook raise/lower Raising and lowering
Boom telescoping Extending and retracting
Slewing Counterclockwise/clockwise
Push button switches
Power ON/OFF
Horn Warning signal
Hook stow/Setting Hook stowing/Mode setting
Speed/Mode Speed control/Mode selection
Start/Reset Engine start/Reset
Stop/EMO Engine stop/Emergency stop
Trigger type accelerator Hydraulic control + Engine control
To Next Page
Loading...
