6-5
NO SHOCK TO THE TRANSMITTER
• During the Transmitter operations, always use a hook belt (1) to
prevent the unexpected drop of it.
• Always avoide an impact on the Transmitter, such as hitting it to any
object.
It may result a damage to the enclosure or internal components
which may cause a failure or malfunction and brings electrical shock
or other serious hazard.
• In the event of such damages, send us or to our agents for services.
Use of such a damaged Transmitter will result in miss-operation and
extend to electrical shock or other serious hazard.
PRECAUTION FOR OPERATIONS IN COLD SEASONS
• Avoid the use of the Transmitter in a condition where the ambient
temperature makes sudden change or becomes extremely low
(-10°C or below) or cold air directly blows
Sudden change in temperature may cause dew formation inside the
Transmitter and which causes failure or malfunction and leads to a
serious hazard.
• In the winter times, allow sufficient idling prior to starting crane
operations. In the winter, due to the low temperature, hydraulic fluid
has higher viscosity. Such condition may result in a delay of
functions in crane operations.
• Keep the Transmitter away from conditions as below for its storage,
where the Transmitter enclosure may deform or discolor, or internal
components may be damaged to bring malfunctions and a serious
hazard:
• Extremely low temperature (-20°C or below) or direct cold air blow.
• Direct sun ray.
• Adjacent to warm air outlets of vehicles.
• Adjacent to housing heating system.
• High humidity.
PRECAUTIONS FOR HANDLING OF CONNECTION CABLE
Do not attempt to hung the Transmitter by the connection cable and
fling it around, or bend the cable or thread on it. Such poor handling
will damage the internal wires or produce other failures.
To Next Page
Loading...
