6-19
5. With a jeweler’s driver (A) to pull out the fuse (8) from its clips,
then examine it.
6. Insert a new fuse or the examined fuse to where the one was.
[2] INSERTION OF A FUSE
After the fuse is examined or replaced, restore the Receiver in the reverse practice of the removal.
CAUTION
• When the three connectors (6) of the first PCB (5) is inserted again, secure them and avoid any
loose conditions.
• Care should be exercised so that the cover (3) of the Receiver will not catch wires when it is
attached back.
[Fuse class]
Type : Grass tube fuse
Rating: 15A
To Next Page
Loading...
