EasyManua.ls Logo

Maeda MC-305C-2 - Page 28

Maeda MC-305C-2
358 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2-4
TEMPORARY STORAGE WHEN ABNORMALITY IS FOUND WITH MACHINE
In case the Machine is found with abnormality and is therefore stored
temporarily waiting for service, apply following measures to notify all
persons in the office that the use is prohibited due to failure.
Indicate warning tags on the crane operation lever and other
applicable parts.
Write clearly the information such as abnormality contents, name
and contact of the storage manager, and the term of storage.
Keep immovable when parking by for instance putting the blocks on
the rubber tracks as pawls.
Pull out the engine key and bring with you.
PROVISION OF FIRE EXTINGUISHER AND FIRST AID BOX
Always observe followings to prepare for injuries and fires.
To prepare for fires, decide the fire extinguisher storage location
and install one, fully read the attached label for the usage and be
prepared for fighting against the emergencies.
Decide the location to store the first aid box. In addition, inspect the
first aid box periodically and replenish the contents as necessary.
Decide the measures to take upon an injury or fire accident.
Decide how to contact the emergency address (for instance the
emergency physician, ambulance or fire department), and show the
contact address at designated position so any person can make the
contact.
DO NOT RUSH AND BE CAREFUL WHEN WORKING
Do not attempt sudden lever operation or harsh driving.
When two or more cranes work close to each other, drive carefully
while paying attention to accidents such as trips caused by
contacting each other. Also, appoint a guide if necessary for
increased prevention of contact accidents.
When abnormality or danger occurs during work, abort working
immediately to avoid hazard.
Abort the work under bad weather (heavy rain, strong wind,
thunder, thick fog).
Decide whether to abort working by seeing the "work abort decision
standard" in the work schedule and by discretion of the work
supervisor of the site.
DO NOT MODIFY
Do not modify the Machine without our written consent under any circumstance.
The modification raises a safety issue, so consult us or our sales service agency beforehand.
We cannot be held responsible for any bodily accident or failure caused by modification that was
performed without consulting us.

Table of Contents

Other manuals for Maeda MC-305C-2

Related product manuals