2-24
CAUTIONS WHEN CHARGING BATTERY
Improper handling when charging the battery may cause the battery
to explode. Follow the manuals attached to the Machine and the
charger, and always observe the followings.
See “Operation 8.3 Cautions in Charging Battery” for details.
• Carry the charger to a location with good ventilation, then remove
the battery cap. Doing so causes the hydrogen gas to disperse and
prevents explosion.
• Adjust the charger voltage to suit the voltage of the battery to
charge. Mistake in adjusting the voltage may cause explosions due
to overheat and ignition of the charger.
• Securely fix the (+) charge clip of the charger to the (+) terminal of
the battery, then securely fix the (-) charge clip to (-) terminal of the
battery.
• Set the charge current to no more than 1/10 of the rated capacity of
the battery, or, in case of quick charge, set to the rated capacity of
the battery or smaller.
• Excessive charge current may cause leap fire and explosion
caused by fluid leak or fluid deficiency.
To Next Page
Loading...
