2-28
CAUTIONS WHEN WORKING ABOVE MACHINE
• Tidy the footing to avoid falling and always observe following
precautions during maintenance above the Machine.
• Do not spill oil or grease.
• Do not sprawl the tools.
• Beware of the footing when walking.
• Do not jump from the Machine under any circumstance.
Use a platform, and secure your body with three locations of the
limbs (both feet and one hand, or both hands and one foot) when
climbing up or down the Machine.
• Use protective equipment that suit the work.
• Do not step on the boom, outrigger or machinery cover to prevent
bodily accidents such as falling or tripping due to slippage.
CAUTIONS WHEN REPLENISHING FUEL OR OIL
The fuel, oils and similar substance may catch fire if a fire comes
near.
Light petroleum is used as the fuel and thus requires extra effort to
observe the followings.
• Keep the engine stopped when supplying.
• Do not smoke when supplying.
• Immediately wipe away dripped fuel or oil.
• Securely tighten the fuel and oil caps.
• Supply fuel/oil at a location with good ventilation.
• Do not leave the site when replenishing the fuel or oil.
BEWARE OF CHIPS WHEN WORKING WITH HAMMER
During the hammering works, keep protective equipment such as
protective glasses and a helmet on, and insert a copper bar or similar
object between the hammer and the target when hitting.
Giving impact to a hard metal part such as a pin or a bearing may
cause the broken chip to enter eye and inflict injury.
To Next Page
Loading...
