Driving modes
6.6 Installing/removing the supporting box
Operating Manual GMK6300L 3 112 xxx en 6 - 67
xx.xx.xxxx
6. Release the locking pin between the supporting box and carrier;
à p. 6 - 83.
7. – Disconnect hydraulic connections;
à p. 6 - 76.
– Disconnect the electrical connection;
à p. 6 - 75.
8. If the supporting box is to be transported:
Turn off and secure the supporting box with truck crane on the separate
vehicle;
à Attaching/raising the supporting box with the truck crane, p. 6 - 77,
à Transporting the supporting box on the separate vehicle, p. 6 - 85.
9. If the supporting box is to be set down:
Turn off the supporting box with truck crane on the supports;
à p. 6 - 78.
10. Install rear bumper if necessary;
à p. 6 - 86.
s
To Next Page
Loading...
