Manitowoc Grove GRT8120 - Steering and Suspension - Fifth Wheel Pivots

MAINTENANCE AND LUBRICATION GRT8120 OPERATOR MANUAL
6-20 Published 3-22-2021, Control # 702-02
Item
Lube Point
Description
Figure No.
Approved
Lubricant
Approximate
Capacity
Service Interval
Service
Application
Steering and Suspension – Fifth Wheel Pivots
28
Fifth Wheel
Pivot Pins
Figure 6-7 A
Until grease
extrudes
Every 500 hours, or
3 months, whichever
interval comes first
LUBRICATE
2 service points
See NOTE 19.
NOTE 19: Use grease fittings provided.
DO NOT USE non semi-synthetic lubricant. Use of non-approved lubricant may damage components.
CAUTION
Possible Equipment Damage!
Use specified semi-synthetic or synthetic lubricants as listed in this section of your GRT8120
Operator Manual. See also your GRT8120 Service Manual for maintenance and lubrication
instructions.
Use of non-approved, non semi-synthetic lubricant may damage components and/or
invalidate published lubricant intervals.
Failure to follow this instruction may cause damage to equipment.