OPERATING CONTROLS AND FEATURES GRT8120 OPERATOR MANUAL
3-12 Published 3-22-2021, Control # 702-02
Emergency Stop Button
The Emergency Stop Button (15, Figure 3-3) is located on
the right overhead control panel.
Push red button in to stop the engine and all crane functions.
When Emergency Stop Button is pushed in, the Emergency
Stop Active Alert in the Alerts Area (Figure 4-68) of the
Operator Display Module (ODM) comes on (red).
Rotate and pull out Emergency Stop Button to allow engine
to be re-started and resume normal operation.
Cab Dome Light
The Cab Dome Light (16, Figure 3-3) is located on the right
overhead control panel.
The dome light has a touch control feature. Touch the light
one time to cause it to come on. Touch the light again to
cause it to go off.
To Next Page
Loading...
Need help?
General
