Mazda 121 - Installation of Mobile Two-Way Radio System; Removal of Ignition Key on Automatic Transaxle Model

CAUTION
GI
CAUTION
INSTALLATION OF
MOBILE TWO.WAY RADIO SYSTEM
lf a mobile two-way
radio system is installed
improperly or if a
high-powered type is used, the
EGI
system
and other systems
may
be affected.
When the vehicle is to be equipped
with a mobile two-way radio, observe
the followlng
precaulions:
1. lnstall the
antenna al the Jarthest
point
lrom
control
units.
2. lnstall the antenna
feeder as far as
possible
from
the control
unit harnesses
(at
least 30 cm
[11.8
in]).
3. Ensure that the antenna and
feeder are
properly
adjusted.
4. Do
not install a high-powered mobile
two-way radio system.
05uGlx'013
REMOVAL OF
IGNITION KEY ON
AUTOMATIC
TRANSAXLE
MODEL
The selector
lever must be in P
(PARK)
to turn the
ignition key
to the OFF
position.
lf the switch seems
to be off but the
key
cannot be
removed, the switch may
still be in the ACC
posi-
tion, or the selector
lever may not be
in P
(PARK).
Shift
the
selector
lever to
P
(PARK),
and turn the
ignition key to the
LOCK
position.
The key should
now be
lree for removal.
MOBILE
TWO.WAY RADIO
"'o'"*'*J
Ll lZ'""-rRoLUN,r
r/rl
FARTHEST POINT
AT LEAST 30 cm
(11.8
in)
EGAT
CONTFOL
UNIT
ENGINE
CONTROL UNIT
R
N
D
s
L
03UGIX.OOs
Gl-11