Mazda 121 - Drive Belt Replacement

CHARGING
SYSTEM
Replacement
1.
Bemove
the fuC and
P/S drive belt.
it equipped
Note
.
Retel
to B Section,
2. Loosen alternator
botts
@
and
@.
3.
Remove the
afternator beli.
4.
Installthe new
alternator belt
and adjust
itto specifications
5.
Tighten all bolts
to the specified
torques.
Tighlening
torques
Mounling
bolt:
38-51
Nm
(3.8-5.3
m-kg, 28-38
fi-lb)
Adlusting
bolt:
l9-26
Nm
(1.9-2.6
m-kg, 14-18
ft-lb)
6. Install
the AJC and
P/S drive
beh ii equipped, and
adjust
it to specificataon.
Note
.
Reter
to B Seclion,
G-15