Mazda 121 - Main Bearing Support Plate; Front;Rear Oil Seal

DISASSEMBLY
ain beadng support
plate (MBSP)
'1.
Remove the
MBSP mounting
bolts
from
the main bearing
cao.
2.
Inden
a
screwdriver
or a
suitable
tool between
the MBSP
and cylinder
block,
and
pry
them apart.
Cautlon
.
Do not damage
or
scratch
the contact
surlaceg
when removlng
old
sealant.
Front oll seal
Remove
the oil seal
with a screwdriver
protected
with a
rag.
Rsar oil seal
Remove the
oil seal
with a screwdriver
protected
with a rag.
PFOTECT
THE EEAA
COVEFI
PFOTECT
THE
PUMP
B-44