Mazda 121 - Replacement of Engine Oil; Replacement of Engine Oil Filter; Recommended SAE Viscosity Numbers

SCHEDULED
MAINTENANCE SERVICES
Recommended SAE
viscosily numbers
Typical specitication: API service SD, SE or SF
REPLACEMENT OF ENGINE OIL
'l.
Warm up the engine.
2. Drain
the oil by removing the drain
plug
and
oilfiller cap.
Warning
.
Walt a
while fo. the engine is too hot,
And be caretul to drain.
3. Reinstall the drain
plug
securely.
Tightening torque:
29-41
Nm
(3.0-4.2
m-kg,
22-30 ft-lb)
4. Refillthe engine with the specified
oiltothe
"F"
levelmarked
on
the level
gauge.
5. Refit the oil
iiller cap securely.
Oil
pan
capacity:3.0
liters
(3.2
US
qt,
2.6
lmp
qt)
REPLACEMENT OF ENGINE OIL
FILTER
1. Remove the oil filter with the SST a
suitable wrench.
2. lJse
a clean
rag to wipe off the
mounting sudace on the
engine.
3.
Apply
a small
amount of clean engine
oilio the rubber seal
ol the new
filter.
4. Install the oil
filter
and
tighten it by hand until the
rubber
seal contacts the base.
5. Tighten the fllter 1 and 1/6 turns
with a filter wrench.
6. Start the engine and check
for leaks.
7. Check the oil level and add oil
if necessary.
Oil filler capaclty
83:
0.17
liter
(0.18
US
ql,
0.15lmp
qt)
(.c)
eF)
-30 -m -10
0 10
20 30 40 50
Engine
oil
5W.30
v
30
'
5w-rd->
:
10w-30
A-7