Mazda 121 - Engine Tune-Up Procedure; Engine Oil Inspection; Engine Coolant; Drive Belt

ENGINE
TUNE-UP PROCEDURE
ENGINE
TUNE.UP PROCEDURE
PBEPARATION
ssr
49 9200 020
Tension
gauge,
49 8019 9A0
ignilion
liming
ENGINE OIL
Inspection
1. Be sure the vehicle is on
level
ground.
2. Warm up the engineto normaloperating
temperature
and
stop
rI.
3. Wait
for five minutes.
4.
Remove the oil dipstick and check
the oil leveland condition.
5. Add or
replace oil if necessary.
Note
.
The dislance
belween the Land
F
marks on lhe dip.
stick repressnts 0.8
liter
(0.85
US
qt,
0.70 lmp
qt).
ENGINE COOLANT
Inspectign
Coolant
level
(englne
cold)
Warning
.
Never remove the radiator
cap whlle the engine is
hot.
.
Wlap a thlck cloth around
the cap when removing il.
1. Verily that
the coolant level is near
the radiator filler
neck.
2. Check that the coolant
level in the coolant reservoir is be'
tween the
FULL
and LOW
marks.
3. Add coolanl
il
necessary.
Coolanl
quality
1. Verify that
there is no buildup oi
rust
or
scale
around the
radiator cap or
radiator filler neck.
2. Verify that the coolant
is free of oil.
3. Fleplace the coolanl
ii necessary.
ORIVE BELT
Inspection
1. Checkthe
drive belts for wear, cracks, and
fraying. Replace
if necessary.
2. Verity that
the drive belts are correctly
mounted
on the
puleys.
V.RIBEED 6ELT
MtwJtM
o x
x
B-5