Mazda 121 - Driveshaft; Engine Mount Member

REMOVAL
2.
Pull the
lower
arm downward
to separate
them from
the
knuckles.
Caution
.
Do not
damage
the
ball-ioint
dusl
boots.
Driveehafi
Separate
the driveshafts
from the
transaxle
by
prying
with a
bar inserled
between
the
shaft and
the
case.
Caution
.
Do not
damage
the oil
sgal.
Enoine mount
member
1.
Suspend
the enoine
wrth
a chain
block
2.
Remove the
No.1
and No.2
engine
mount
nuts.
3.
Removethe
engine
mount
member
bolts
and
nuts and
the
engine
mount
member.
Caution
.
Be
caretul
so that
the engine
does
not fall
when
removlng the
member'
ro, J"o,^.
]F
"o , 1"n,",
MOUMI
MOUNT
B-30