Mazda 121 - Fan Motor Inspection; Fan Motor Replacement

E
FAN
IIOTOR
1.
Cooling
fan
connector
2. Fiadiator cowling
E-12
FAN MOTOR
INSPECTION
1. Check that
the battery
is fully charged.
2.
Disconnect
the fan motor
connector.
3. Connectthe
battery
and an ammeter
to
the lan motor
con-
neqor.
4. Verify that
current
is
as
specilied.
Current
(A)
5. ll current
is not within
speciiication
and/orthetan
does
not
turn smoothly,
replace
the lan
motor'
REPLACEMENT
Cautlon
;
Posiiion the
hose clamp
in the orlginal
location on the
hose, and
squeeze
the clamp
llghtly
with large
pliera
to ensu.e a
good
llt.
1. Disconnecl the
negative battery
cable.
2. Drain
the engine
coolant.
3. Remove
in the order
shown in the
figure.
4. lnstall in
the reverse
order of removal.
7,3-ll
x{
(30-110
d*q,
30-95
lDlD)
0,01-o.oit
f
(0.ra--a.22
ciFtg,
015-o
1l lFlb)
0.oa'0,06 Nfl
(0JHr,56
crF*!,0.3!H.5o
lFlb)
3. Cooling
fan
4. Fan
motor
It4TX
ATX
B3
6.6+1