Mazda 121 - Inspection of Drive Shaft Dust Boots; Tightening of Bolts and Nuts on Chassis and Body; Inspection of Exhaust System Heat Shield

SCHEDULED
MAINTENANCE
SERVICES
INSPECTION OF
DRIVE SHAFT
DUST BOOTS
Check
the dust boot
on the drive
shaft for cracks, damage,
grease
leakage, and
a loose boot band.
TIGHTENING OF
BOLTS AND NUTS
ON CHASSIS AND
BODY
'1.
Tighten all seat
mounting bolts.
2. Retighten any
loose nuts and
bofts on thechassisand
body
to the specified
torque.
(Refer
to Section
TD.)
TNSPECTION OF
EXHAUST SYSTEM
HEAT SHIELD
Check
the clearance
between the
insulator and body and also
between
the insulator
and the exhaust
system.
A-20